Free Shipping on Orders Over $99

Free Shipping Policy

Free Shipping applies to all orders placed for $99 and above
(pre-tax value). Some restrictions apply:

  • Offer valid in the Lower 48 States only
  • Excludes Travel Cases and some other oversize items (prices can be calculated in the cart before checkout)

Rotor 3D Plus Crankset

The Rotor 3D Plus Road Crank is compatible with BBright™, BB30 and BB30 pressfit framesets. It is supplied with chainring nuts and bolts, two 11.5mm spacers and one 1mm spacer. Use one 11.5mm spacer on each side for BB30 installations. Use one 11.5mm spacer on the drive side and the 1mm spacer on the non-drive side for BBright™ installations. Complete directions are included.

The Rotor 3D Plus crank is made from an extruded aluminum bar and then CNC machined with three internal chambers running the length of the crank. This Trinity Drilling System allows excess aluminum to be removed from the core while still maintaining structural strength. This design is much stiffer and a significant improvement on earlier Rotor cranks. A 30mm alloy spindle reduces weight and enhances rigidity. The laser-etched graphics give a nice look. The 3D 110 BCD cranks are compatible with any 110mm bolt circle diameter chainrings.


  • 110mm bolt circle
  • Trinity Drilling System
  • 471 grams without chainrings
  • Includes two 11.5mm spacers and one 1mm spacer
  • Includes a full set of alloy chainring nuts and bolts
  • Compatible with BBright™, BB30 and BB30 pressfit framesets
  • Designed with direct input from the Garmin-Cervelo Team

    Please note: chainrings and bottom bracket bearings and seals not included

  • $600.00


    Write Review

    Average Rating:


    Posted on 6/9/2012

    Used on my 2011 Cervelo R3 team. Fit right in no problems with BBright system. Super light and stiff. Zero problems. Whole bike 61cm came in at 15 3/4 lb

    Pros Light strong stiff, fit perfect

    Cons Came ith 24mm bearings should of had 30mm, price