Founded along a mountain stream that was used to power their original manufacturing, DT Swiss is the world leader in spoke manufacturing. From years of development DT has created a proprietary blend of metal alloys used to build their spokes. Their experience has driven technology and innovation in spokes and it is possible to say that they make the best spokes in the world.
DT Swiss introduced the Revolution spoke for those who are looking for a lighter weight alternative to their Competition spokes. The Revolution spokes are made with a rotary forging process. This process not only forms the final shape and butting of the spoke, but it also compresses the metal eliminating voids while aligning the grain structure of the spoke. This process is essential to make the Revolution spoke as strong as it is and able to hold up to the rigors of cycling. DT Swiss rolls the threads onto their Revolution spokes as well. This process, similar to the forging process, compresses the metal and makes a much stronger thread than if the threads were cut out of the spoke.
We like the Revolution spokes for a multitude of reasons but most importantly their ride quality is great. They provide a smooth ride which is great for long days in the saddle. They also provide a weight similar to the Aerolite with a cost more similar to the Competition. If Lightweight and performance are two things you are looking for in your next wheel this is the spoke for you.
We recommend DT Prolock nipples with this spoke due to the black anodizing process used. Give our sales staff a call if you have any questions. Our professional wheel builders are happy to walk you through the process 800.627.6664
Not for use with Disc Brakes.You must specify size in millimeter lengths in the comments section of your order.
These are absolutely great spokes. I have been using them for 15 years and have built up 10 different wheels with them, the last of which has roughly 20K miles on it. These are great for front wheels and NDS on the rear--I usually pair them with DT Comp spokes for the rear DS. Care must be taken when bringing these spokes to tension as they twist readily. Just hold on to them so you can feel them windup, over-tighten the nipple a bit, then back down to unwind the spoke. Of course, as with any other spoke, you must stress-relieve the spokes and bring them to tension in stages. I have only broken one of these in the last 10 years--and in two cases, I swapped out the rim while keeping the same spokes.
these are great, and surprisingly strong, spokes. i have them laced on a pair of mavic mr601 hubs and cxp33 rims as radial on the front and rear non-drive, and 3x on the drive side. i built the wheel myself and has about 5000 miles on it. ive only had to true the rear twice, and thats with only a quarter turn on the nipples (yes, im that anal).