The Standard nipple. DT's Brass nipple is available in a 12mm or 16mm length and provides superior strength and corrosion resistance for any build. It is a superior nipple in many ways to alloy nipples with one exception... weight.

When you are selecting a nipple it is actually an important decision. This is the part of the wheel that holds it all together so you need to make a choice that will live up to the rest of the wheel. There are 4 basic selections for nipples currently, Brass, Brass Prolock, alloy and alloy prolock. The big difference is material. Brass and Alloy differ in only a few ways. Brass nipples are typically the most durable nipple and best to be used for a wheel that will be serviced frequently. They have a great resistance to corrosion as well. Alloy nipples have a substantial weight advantage so building a wheel with alloy nipples will provide you with the lightest weight wheel you can build. They are also available in a good variety of colors. Both materials are offered in Prolock. Prolock nipples come with a pre applied thread locking agent. This makes the spoke easy to build with since the material acts as a lubricant while building. In addition it helps the wheel maintain its tension through its lifetime. In short, Brass nipples are best used in corrosive environments, if you can see the ocean from your window that is probably a good indication that Brass nipples are a good idea. Alloy nipples are best for light weight high performance builds and Prolock, well that is always a good idea, especially if you are building with a black spoke since the black material tends to do better with more lubrication when building.