The LOOK X-Track MTB Gravel Edition pedals adapt the X-Track platform for mixed-surface riding. The pedal body uses composite construction with an integrated stainless steel cleat contact plate that handles engagement and release cycles without wearing down the composite material. A chromoly axle runs on sealed cartridge bearings that isolate rotation from dirt and water intrusion. The two-sided entry system allows clipping in from either side of the pedal, which eliminates the need to flip the pedal with your foot before engagement during quick remounts or technical sections.

These pedals work with LOOK's two-bolt X-Track cleats and are not compatible with Shimano SPD cleats despite the similar mounting pattern on shoes. The cleat interface on these pedals is specific to LOOK's system, so attempting to use SPD cleats will result in poor engagement or no retention at all. The cleat retention mechanism uses adjustable spring tension, accessible through a hex bolt at the rear of each pedal. Tension adjustment allows you to customize how much force is required to clip in and out, which is useful when setting up new pedals or transitioning between different riding surfaces. The sealed cartridge bearing system isolates the axle rotation from dirt and water, extending service intervals compared to loose ball bearing designs. When bearings eventually wear, the cartridge design allows for straightforward replacement without specialized tools.

The Gravel Edition designation indicates this pedal is positioned for mixed-surface riding where engagement needs to work through mud, gravel, and pavement. The composite body sheds debris through its open design, and the stainless steel contact plate maintains consistent engagement when conditions deteriorate. The pedal body sits close to the crank arm, maintaining a natural pedaling stance across road and off-road terrain. Pedal body height provides cornering clearance on technical sections without sacrificing stability during the pedal stroke.