Bicycles > Road > Framesets
Description
This new Dogma GR Frameset has a few minor cosmetic blemishes, and is in perfect working order. On the front of the headtube, there is an approximately 1cm scratch and on the left side of the headtube there is a rub mark where the matte finish has become polished. These blems are cosmetic only and do not affect structural integrity. This factory authorized sale on the Dogma GR frameset comes with a full manufacturer's warranty.
Pinarello's Dogma GR is the brand's first dedicated gravel race platform, and it draws from three existing programs to get there: the speed and responsiveness of the Dogma F, the agility and control of the Crossista, and the traction of the Dogma XC. The result is a frameset engineered specifically for UCI-level gravel racing, where courses mix hardpack, loose gravel, and pavement in efforts under 5 hours. Every tube is aerodynamically profiled using the same design philosophy Pinarello applies to its road bikes, and the frame is constructed from Torayca M40X carbon fibre, a material also used on the Dogma F — delivering the stiffness, responsiveness, and durability that gravel racing demands at 960 grams in a size 530 (unpainted). The listing covers the frame, fork, headset, seatpost, and axles; the Talon Ultra Fast GR integrated cockpit is sold separately, leaving fit and bar choice open to the rider.
The Headtube BOW nose design, first introduced on the Dogma F8 in 2014, has been refined with reduced volume and width at the leading edge to improve frontal aero efficiency. That narrower frontal profile is enabled by a new elliptical steerer tube and a completely new headset with differentiated bearings: wider on the bottom and narrower at the top. Internal e-TICR cable routing runs brake hoses in front of the steerer rather than beside it, an aerodynamic detail carried directly from the Dogma F. The redesigned Onda fork with ForkFlap technology provides 50mm of rake across all 9 frame sizes, contributing to composed front-end stability at speed on mixed terrain, and a hidden front thru-axle thread cleans up the fork's leading edge.... Read More
Features
- Frameset includes frame, Onda fork, headset, and Adaptive seatpost — handlebar sold separately
- Torayca M40X carbon fiber frame — same layup as the Dogma F
- Onda carbon fork with ForkFlap hidden thru-axle thread, 50mm rake
- Adaptive seatpost with 8mm vertical flexion, 3D-printed titanium seat clamp
- Elliptical headtube with differentiated bearings and e-TICR cable routing
- Compatible with Talon Ultra Fast GR integrated handlebar (sold separately)
- Tire clearance: 45mm front, 42mm rear
- 425mm chainstays (427mm on 2 largest sizes)
- Downtube-integrated tool storage
- Italian threaded bottom bracket, UDH compatible
- 12x100mm front, 12x142mm rear thru-axles, flat mount disc
- Integrated bento box mounting points on top tube
- Rock protector on bottom bracket area
- 960 grams frame (size 530, unpainted)
Geometry
| Size | 46.5cm | 50cm | 51.5cm | 53cm | 54cm | 55cm | 56cm | 57.5cm | 59.5 |
|---|---|---|---|---|---|---|---|---|---|
| Wheel Size | 700c | 700c | 700c | 700c | 700c | 700c | 700c | 700c | 700c |
| Stack | 535mm | 542mm | 548mm | 559mm | 568mm | 578mm | 588mm | 601mm | 632mm |
| Reach | 358mm | 365mm | 371mm | 379mm | 381mm | 383mm | 384mm | 390mm | 395mm |
| Head Angle | 70° | 70.5° | 71.0° | 71.5° | 72.0° | 72.0° | 72.5° | 72.8° | 73.0° |
| Seat Angle | 74.4° | 74.0° | 73.7° | 73.7° | 73.4° | 73.4° | 73.0° | 73.0° | 72.4° |
| Top Tube Length | 515mm | 525mm | 535mm | 545mm | 552mm | 557mm | 565mm | 575mm | 595mm |
| Head Tube Length | 119mm | 124mm | 129mm | 138mm | 146mm | 167mm | 165mm | 178mm | 214mm |
| Fork Offset | 70mm | 40mm | 40mm | 40mm | 40mm | 40mm | 40mm | 40mm | 40mm |
| Chainstay Length | 422mm | 422mm | 422mm | 422mm | 422mm | 422mm | 422mm | 422mm | 422mm |

























