Thomson Elite Setback Seatpost
By applying a simple bend into the standard Elite seatpost, Thomson came up with a clever way of giving riders 16mm worth of setback. The design of the clamps also allows the post to be rotated forward for 16mm of "set-forward" if so desired All else remains the same as the classic Elite post.
The clamp design is simple, reliable and easy to adjust. It consists of an upper and lower clamp that is held to the post with two screws. The screws lace through holes that are machined into the head of the shaft, then through the clamps and thread into bolts that rest in the upper clamp plate. It's that simple.
The shaft itself is made from elliptically extruded, machined and anodized 7000 series alloy. The clamp plates are forged and anodized. The plates are 41mm long so they prevent seat rail bending from impact loads. Bolts are steel while the washer and nuts are brass which help inhibited rust and corrosion.
Cosmetically, the Elite is a beauty. The shaft has a micro ribbed texture and etched Thomson graphics on each side of the post. You can get them in either silver or black with options of lengths and diameters to choose from. Weights range depending on the post. A 27.2x250mm weight in at 193 grams while the 31.6x367 comes in at a very respectable 227 grams.
- One piece shaft/cradle construction
- 7000 series alloy machined construction with internal wall ovalization for strength/resilience
- Ribbed anodized finish
- 2-Bolt fore-aft clamp adjustment
- Steel bolts with brass nuts/washers
- 16mm setback
- Several lengths/diameters to choose from
- Weight: 193 grams (27.2x250mm)
- Made in USA