800.627.6664
*Free shipping on orders over $99
X

Free Shipping Policy

Free Shipping applies to all orders placed for $99 and above
(pre-tax value). Some restrictions apply:

  • Offer valid in the Lower 48 States only
  • Excludes Complete Bicycles, Framesets, and some other oversize items
  • Excludes certain sale items
Filters
Description

Campagnolo's N3W freehub standard exists to solve a geometry problem: cassettes that start at 9 or 10 teeth simply won't clear a freehub body built around an 11-tooth minimum. The N3W body keeps the same spline groove profile Campagnolo has used for decades but measures 43.6mm against the classic body's 48mm, a difference of 4.4mm that makes room for those small cogs. The AC21-N3W Adapter runs that math in reverse, putting the 4.4mm back so cassettes with an 11-tooth smallest sprocket mount correctly on the same wheel.

The kit is two pieces. An aluminum spacer ring slides onto the freehub splines and extends the usable length of the body, and an extended lockring with a longer collar reaches down into the recessed threads on the N3W driver. Both are necessary. The spacer sets the cassette's position and spline engagement, the lockring does the clamping, and a standard cassette lockring is too short to thread properly once the spacer is in place. That's why Campagnolo packages them as one part number. Nothing about the kit is wheel-specific, either, so it fits any driver built to the N3W standard, including the N3W retrofit bodies offered for older Campagnolo hubs.

Check your cassette before ordering. With the adapter fitted, an N3W driver accepts Campagnolo 9-, 10-, 11- and 12-speed Ultra-Drive cassettes, meaning anything with an 11-tooth smallest sprocket. It is not needed, and will not work, for Ekar 13-speed cassettes or the wireless 12- and 13-speed cassettes designed with 9- or 10-tooth starting sprockets. Those mount straight to a bare N3W body. The supplied lockring is the 11-tooth version specifically, so the smallest cog on your cassette is the only spec that determines whether this is the right part.... Read More

Features

  • Adapter kit restores classic Campagnolo freehub length on N3W driver bodies
  • Adds 4.4mm of effective length to the N3W freehub body
  • Includes aluminum spacer ring and extended lockring
  • Extended lockring collar engages the recessed threads on the N3W body
  • Lockring sized for cassettes with an 11-tooth smallest sprocket
  • Enables Campagnolo 9-, 10-, 11- and 12-speed Ultra-Drive cassettes on N3W drivers
  • Not required for Ekar 13-speed cassettes
  • Not required for Campagnolo wireless 12- and 13-speed cassettes with 9T or 10T starting sprockets
  • N3W body measures 43.6mm wide against 48mm for the classic Campagnolo body
  • Same spline groove profile as the classic Campagnolo freehub
  • Aluminum construction
  • Fits any Campagnolo N3W freehub body, including N3W retrofit drivers
  • Installs with a standard Campagnolo-pattern cassette lockring tool
  • No hub or freehub body disassembly required
  • Campagnolo part code AC21-N3W