Out-front computer mounts need to balance rigidity with vibration damping while keeping the unit visible and accessible. The Hammerhead Mounting System addresses these competing demands with a low-profile arm that positions the Karoo centered over the front wheel, flush with handlebar height. This placement reduces aerodynamic drag compared to stem-mounted configurations and keeps the screen in your natural sightline without blocking your view of the road ahead.

The mount clamps to standard 31.8mm handlebars and offers 12.5mm of fore/aft adjustment, allowing you to fine-tune positioning based on cockpit length and personal preference. Installation uses a fully captured fastener design where the bolt stays attached to the mount body during tightening, eliminating the fumbling that comes with loose hardware and reducing the chance of dropping a bolt into the grass or gravel. The mount connects to the Karoo through Hammerhead's proprietary interface, which provides a larger contact surface than quarter-turn systems for improved stability on rough terrain.

At 36 grams, the mount adds minimal weight to your setup. The design prioritizes structural integrity without excess material, keeping the arm thin enough to minimize visual bulk while maintaining the stiffness needed to prevent screen bounce on cobbles or washboard gravel. If you're running an aero handlebar or integrated cockpit that won't accommodate the standard clamp, the separate Quarter-Turn Mounting Adapter allows the Karoo to attach to existing third-party mounts you may already have in place.