SRAM's Disc Brake Hose Kit under part number 00.5318.039.000 is the Black Banjo version — the hose kit that fits SRAM's older-generation road and mountain hydraulic disc brakes with the black banjo fitting at the caliper end. It works with Level ULT (A1), Level TLM (A1), CODE R/RS/RSC (B1), Red eTap HRD, S900 Monoblock, and Code Stealth Ultimate, Silver, and Bronze calipers . Before you order, look at the caliper on your bike and confirm the banjo (the elbow fitting where the hose meets the caliper body) is black — if it's silver, or if your brakes use a beveled banjo or double compression fitting, you need a different kit.

The kit is designed as an OE replacement, so what you get in the box is exactly what SRAM specs on the assembly line. Included are the brake line and necessary seals, two short road-length compression nuts, two long MTB-length compression nuts, two SRAM barbs, two SRAM olives, a caliper compression nut boot, two external cable holders, two stem mounted cable holders, and a T8 Torx key for barb installation . Having both road and MTB compression nuts in the same kit is useful — you can cut the 2000mm hose to length for either a road or mountain setup without hunting for extra small parts.

One thing to know before you buy: this kit covers a single caliper. If you're replacing both the front and rear hoses on a complete bike, order two. It's also worth noting this is a DOT-fluid hose kit, so it pairs with SRAM and Avid brakes that use DOT 4 or DOT 5.1 — compatible hydraulic brake fluids are DOT 4 or 5.1 . After installation you'll need to bleed the system, so plan on having a SRAM Pro bleed kit and fresh fluid on hand.