Press-fit bottom brackets creak because the cups can move within the shell under pedaling loads. The Wheels Manufacturing BBRight ABEC-3 Threaded Bottom Bracket solves this by threading two machined aluminum cups into each other through the frame, clamping the assembly in place and eliminating the micro-movement that causes noise and accelerates bearing wear. If you've chased creaks through your BBRight-equipped frame with retaining compound and careful installation and still ended up with noise after a few thousand miles, this design addresses the root cause rather than masking the symptom.

This version fits SRAM DUB cranksets with their 29mm spindle diameter, making it the right choice for riders running Force, Rival, or Red AXS groupsets on Cervelo frames. The BBRight shell dimensions measure 46mm inner diameter and 79mm width, accommodating the asymmetric bearing placement that gives these frames their drive-side stiffness advantage. The Enduro ABEC-3 sealed bearings handle pedaling loads reliably without the price premium of angular contact or ceramic options, and when they eventually wear out, you replace just the bearing cartridges rather than the entire bottom bracket.

The package includes a generous spacer selection for dialing in chainline: two 0.5mm spacers, two 1.0mm spacers, one 2.5mm spacer, and one 5mm spacer. DUB cranksets can require different spacing depending on frame geometry and chainring configuration, so having these options in the box saves a trip back to the shop. Silicone dust seals protect the bearing interfaces from contamination, extending service life in wet or gritty conditions.... Read More